Word Count:
1180

For the best Roof Repairs Kildare company, call Ace Roofing Kildare.

There are two type of hydro massage bathing systems:
1. Whirlpools, more commonly known by the brand name Jacuzzi.
2. Airspas, more commonly known by the brand name Airbath.

airbaths,whirlpools,spas,airspas,steam,saunas,hydro-massage

To find the best Roof Repairs Kildare company, click here for Ace Roofing Kildare.
WHIRLPOOLS AND AIRSPAS (Jacuzzi and Airbath):
There are two type of hydro massage bathing systems:
1. Whirlpools, more commonly known by the brand name Jacuzzi.
2. Airspas, more commonly known by the brand name Airbath.
Whirlpools are characterised by having jets on the side of the bath about half way up and a suction point (similar to a colander) in one of the bottom corners. This type of system produces hydro-massage by sucking water from the bath and pumping it out of the jets on the side under pressure. To increase the pressure of the jets most whirlpools have a control on the top of the bath which allows air to be sucked in to the jet of water.
The main difference between a whirlpool and a Jacuzzi is that the size of the jets is bigger on the Jacuzzi and the air and water mix is different. This difference produces a more powerful jet of water with the Jacuzzi (whether this amount of power is necessary with a standard domestic sized bath is a matter of opinion).
The difficulty with all whirlpools is that they hold a small amount of water in the jets and pipe work when emptied. Depending on who fits the system this amount can vary between an egg cup full and several pints.
The second difficulty with some whirlpools is that not all baths are designed to have them fitted. This can result in the jets being sited very high up the sides of the bath, with the effect that when you lay in the bath the jets of water do not hit you but spray over the top of you and only agitate the top one inch of water. This will result in a longer bathing period required to achieve the hydro-massage effect.
Baths where the jet positions are moulded into the side allows the jets to sit lower and so intensify the massage. With this type of system it is not advisable that small children or older people are left unattended whilst in the bath.
The third difficulty with whirlpools of all types is that they do not have the ability to maintain the water temperature. The result of this is that the average length of time a bath stays warm is approximately 30 minutes. That is unless you add more hot water. Dependant on the type of whirlpool system you choose it may take between 10 minutes and 25 minutes to achieve the hydro-massage effect on the body.
Airspas are characterised by having a series of jets or holes fitted/drilled into the base of the bath. They produce air through the jets under pressure to fill the bath with bubbling water. This agitation of the water is what causes the hydro-massage effect. The difficulty of this type of system is that it has a tendency to cool the water in the bath. It is possible to with this type of system to have any level of water in the bath whilst the system is in use and so makes it ideal for children and older people. However due to the reduced pressure of the air jets over the whirlpool jets it can take longer to produce the hydro-massage effect. The Airbath system has a device called a Warm Air Injection which allows a small amount of hot water to heat the air stream as the air is pumped through the jets. The result of this is that Airbath claim that the system will
maintain the bath water temperature. This then allows a person to stay in the bath for longer and so gain the full benefit of the hydro-massage. read more